Elo TouchSystems ET1229L Series User Manual download pdf (Page 214)

100

101

2. Select the cue's Delay cell and press Set.

5, Enter : enter the delay time. As with fade times you can assign separate

delay times for the incoming and outgoing parts of the cue, for example 3/5.

Alternatively, you can use the command line, pressing the Time key twice to assign the delay

time:

•

Cue 2 Time Time 5 Enter

Tip

Note that the Delay time should not be confused with the Wait time; see

Cue Wait Timing (p.218).

13.2.3 Paths

Paths determine the way parameter values change during a cue. For example, with the simplest

(linear) path, an intensity parameter travels from its start value to its end value at a steady rate

for the duration of the cue. The paths available are shown in Figure 13.2, “Path Types”.

To select a path for a cue:

List 1 Open : open the Cuelist window.

2. Select the cue's Path cell and press Set. The Crossfade Paths window will

open.

3. Select the path type required for the incoming and outgoing parts of the cue.

4. Press OK

Tip

The shape of the paths described above applies when the cue is asserted.

When it is released, the path is effectively reversed. For example, attrib-

utes with a ‘Start’ path will snap on the Go of a cue, but will snap at the

very end of that cue being released (behaving like an ‘End’ path).

13.2.4 Assigning Cue Timings in the Cuelist Window

You can edit fade or delay times in the Cuelist window. Assigning fade or delay times here will

assign the new value to all the parameters of all the ﬁxtures in the cue.

1. Open + Choose : open the cuelist of the desired master.

2. Click in the cell for the fade or delay time of the desired cue, and press Set.

3. Type in a time value, and press Enter.

When entering a time value, it should be in the form:

[hours] h [minutes] m [seconds] s / [hours] h [minutes] m

[seconds] s

High End Systems210

Section 13: Timing

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 479 480

Comments to this Manuals

No comments

Elo TouchSystems ET1229L Series User Manual Page 214

Comments to this Manuals

Related products and manuals for TVs & monitors Elo TouchSystems ET1229L Series