Elo-touchsystems 1200L User Manual

9User ControlsFront Panel ControlsNo. / Icon Control Function MENU Menu button Displays the OSD menus SELECT Select Selects the adjustment itemsfrom

10How to Use the OSD Menus1. Press the “MENU” button to pop up the on-screen menu and to toggle between Main Menu Page 1 to Page 3.2. Choose the ad

11On-Screen Display Menus" BrightnessAdjusts the brightness of the image." ContrastAdjusts the contrast of the display image." Horizont

12"Auto-AdjustmentChoose this function to obtain an optimum image."Re-ScalingIf the input resolution is less than 800 x 600, you can select

13" VolumeAllows you to control the volume of sound,"MuteAllows you to disable the sound immediately."ResetReturns the display paramete

14TroubleshootingIf you are experiencing trouble with the LCD display, refer to thefollowing. If the problem persists, please contact your local deal

15Warning SignalSometimes you will see warning messages from the LCD screen. Thismeans that the LCD display cannot receive the signal from the compute

16Product Dimensions340mm/13.4”286.7mm/11.3”170mm/6.7”Front ViewSide ViewTop View

17Touchmonitor Specifications12” LCD Touchmonitor (ET12-XXWC-1) SpecificationsepyTyalpsiDrotsisnartmlifniht,xirtamevitcAyalpsidlatsyrcdiuqil,)TFT(eziS

18AccuTouch Touchmonitor SpecificationslacinahceMnoitcurtsnoCgnitaocecafrus-drahedistuohtiwretseyloP:poT.hsiniferalgitnaroraelchtiw.gnitaocevitcudnoct

Copyright © 2001 Elo TouchSystems Inc. All Rights Reserved.No part of this publication may be reproduced, transmitted, transcribed, stored in aretriev

19Compatibility ModesAGVMBI053x046075.13AGVMBI004x046075.13AGVMBI084x046065.13AGVMBI004x027075.13AGVASEV084x046279.73AGVASEV084x046575.73AGVASEV084x04

20Installing the Driver SoftwareElo TouchSystems provides driver software that allows yourtouchmonitor to work with your computer. Drivers are located

212. Follow the directions on the screen to complete the driver setupfor your version of Windows.If the AutoStart feature is not active:1. Click Start

22To run the INSTALL program:1. Type INSTALL at the DOS prompt in the directory con-taining the driver install files.2. INSTALL asks you to select the

23Regulatory InformationI. Electrical Safety Information:A) Compliance is required with respect to the voltage, frequency, and current require-ments i

24c) The user is cautioned that changes or modifications to the equipmentnot expressly approved by the party responsible for compliance couldvoid the

25WarrantyExcept as otherwise stated herein or in an order acknowledgment delivered toBuyer, Seller warrants to Buyer that the Product shall be free o

26SELLER’S LIABILITY UNDER THE WARRANTY SHALL BE LIM-ITED TO A REFUND OF THE PURCHASE PRICE OF THE PRODUCT.IN NO EVENT SHALL SELLER BE LIABLE FOR THE

2Usage NoticePrecautions ... 3IntroductionAbout the Product ...

3Usage NoticeWarning- To prevent the risk of fire or shock hazards, do notexpose this product to rain or moisture.Warning- Do not open or disassemble

4IntroductionAbout the ProductThis product is a 12.1” SVGA TFT color LCD touchmonitor with thefollowing features:G Direct analog RGB inputG Active mat

5RS-232 TouchscreenInterface CableAudio-In CableUS/CanadaPower CordPackage OverviewCheck that the following 10 items are present and in good condition

6InstallationProduct OverviewKMain UnitKRear ViewMENU SELECTLCD TouchmonitorStandUser ControlsPowerSwitchEarPhoneAudioInPowerDC-InDisplayInputRS-232To

7Start Your InstallationKTilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired.KConnecting the Touchmonitor

8Notice: To ensure the LCD display works well with your computer, please configure thedisplay mode of your graphic card to less than or equal to 800 x